|
|
|
|
|
|
74LVCV2G66DC Y66 的参数 |
开关配置
Circuit |
2*单刀单掷 2*SPST |
导通电阻
On-State Resistance |
10Ω/Ohm |
电源电压
Voltage - Supply |
2.3 V ~ 5.5 V |
Description & Applications |
Bilateral switch a low-power, low-voltage, high-speed Si-gate CMOS device. Each switch includes an overvoltage tolerant input/output terminal (pin nZ), an output/input terminal (pin nY) and low-power active HIGH enable input (pin nE). The overvoltage tolerant switch terminals allow the switching of signals in excess of VCC. The low-power enable input eliminates the necessity of using current limiting resistors in portable applications when using control logic signals much lower than VCC. These inputs are also overvoltage tolerant. 5 V tolerant input for interfacing with 5 V logic High noise immunity Switch handling capability of 32 mA CMOS low-power consumption Latch-up performance exceeds 250 mA Incorporates overvoltage tolerant analog switch technology Switch accepts voltages up to 5.5 V independent of VCC |
描述与应用 |
双边开关 低功耗,低电压,高速硅栅CMOS器件。 每个开关包括过压容限输入/输出端(引脚NZ),输入/输出 终端(针NY)和低功耗主动高启动输入(引脚NE)。 的过压容限开关端子允许超过的VCC的信号的切换。 的低功耗的使能输入消除了使用的电流的限流电阻的必要性 便携式应用中使用时,控制逻辑信号远远低于VCC。这些输入 也过压容限。5 V宽容输入与5 V逻辑接口 ?高抗干扰 ?切换处理能力为32毫安 ?CMOS低功耗 ?闭锁性能超过250 mA ?内置过压容限模拟开关技术 ?开关接受电压高达5.5 V独立的VCC |
技术文档PDF下载 |
在线阅读  |
|
|
|
|
相关型号列表 |
型号 |
标记/丝印/代码 |
厂家 |
批号 |
封装 |
数量 |
描述 |
详细资料 |
74LVCV2G66DC |
Y66 |
NXP/PHILIPS |
06+NOPB |
VSSOP8/SOT765-1 |
0 |
集成电路ICIntegrated Circuit(IC)-开关ICSwitch IC-模拟开关Analog Switch |
查看 |
74LVCV2G66DC |
Y66 |
NXP/PHILIPS |
06+NOPB |
VSSOP8/SOT765-1 |
0 |
集成电路ICIntegrated Circuit(IC)-开关ICSwitch IC-模拟开关Analog Switch |
查看 |
|
|
|